TAGGED: ansys-cfx, contour-pressure, error, simulation, workbench
-
-
April 11, 2024 at 1:58 pm
Abhinavrao T R
SubscriberIn my recent simulation, i encountered a graph going to -72 psi from an initial pressure of 75 psi. I am having trouble interpreting this graph as the ambient pressure is 14.7 psi and the graph shows -72 psi. I am having trouble understanding this. Any help would be greatly apreciated.Â
-
April 11, 2024 at 2:54 pm
Rob
Forum ModeratorPosting some images will help.Â
-
April 12, 2024 at 12:35 pm
-
-
April 12, 2024 at 1:02 pm
Rob
Forum ModeratorAs I have no idea what you're modelling all I can do is agree that you've manage to create a plot of static pressure with position.Â
-
Viewing 2 reply threads
- The topic ‘Interpreting pressure graph’ is closed to new replies.
Ansys Innovation Space
Trending discussions
- How do I get my hands on Ansys Rocky DEM
- Non-Intersected faces found for matching interface periodic-walls
- Unburnt Hydrocarbons contour in ANSYS FORTE for sector mesh
- Help: About the expression of turbulent viscosity in Realizable k-e model
- Script Error
- Mass Conservation Issue in Methane Pyrolysis Shock Tube Simulation
- Facing trouble regarding setting up boundary conditions for SOEC Modeling
- convergence issue for transonic flow
- Running ANSYS Fluent on a HPC Cluster
- Point exception in erosion calculation
Top Contributors
-
1927
-
823
-
599
-
591
-
366
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.