Fluid Flow – Compressible Flow over a Wing-Body Junction

- August 18, 2017 at 7:43 pm
  
  svecchi
  Ansys Employee
  
  The airplane body above is subjected to 600 mile per hour winds at 0 degrees to simulate it traveling mid flight. In an effort to study the flow over the wing-body junction, the velocity vectors and streamlines will be calculated. See the attached file for the tutorial on this problem
- January 12, 2018 at 4:01 pm
  
  Raef.Kobeissi
  Subscriber
  
  Thanks for sharing that!
- February 5, 2019 at 6:57 pm
  
  Waddoo
  Subscriber
  
  I'm finding an issue in ANSYS AIM 19.2, where when selecting the Inlet, Outlet, and Opening bodies, AIM says the faces of the enclosure are invalid locations for the region. I'm unsure where I went wrong with the project but any additional help would be greatly appreciated.