-
-
July 25, 2024 at 7:30 am
louiee1907
SubscriberHi,Â
I want to prove the nCode fatigue result. I searched many articles, but did not find. I don't have budget to do test of specimen. Is there any article you know.Â
-
July 26, 2024 at 1:39 pm
danielshaw
Ansys EmployeeNo. Fatigue results are hard to "prove", because there is wide variation in the test results. You will never be able to correleate a fatigue simulation result with single test result. You need to have a statistically significant set of tests and confirm that the simulation result is within the range of test results.
-
Viewing 1 reply thread
- The topic ‘Fatigue Analysis and Test Validation’ is closed to new replies.
Ansys Innovation Space
Trending discussions
- At least one body has been found to have only 1 element in at least 2 directions
- Script Error Code:800a000d
- Element has excessive thickness change, distortion, is turning inside out
- Image to file in Mechanical is bugged and does not show text
- Help to do quasistatic analysis in static structural module
Top Contributors
-
1942
-
865
-
599
-
591
-
366
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.