-
-
July 5, 2024 at 11:40 pm
Jalaj Chaturvedi
SubscriberFor one substrate (non-lossy), it is giving me satisfactory reults while for lossy substrates, the s parameters are very weird and far from real.
Can you please help me out on this. Is there anything extra that needs to be done to account for lossy substrates ? -
July 26, 2024 at 8:40 am
DMARATHE
Ansys EmployeeHi Jalaj,
Could you please share some additional details :
What type of simulation you are doing Antenna or CPW Line ?
What is frequency of application and sweep frequency ?
What type of Port (Lumped or Waveport), is used in Simulation
Having screenshot of the results comparsion and model with excitation/port is appreciated.
Thanks,
-
Viewing 1 reply thread
- The topic ‘Erraneous Results for Lossy Substrates in HFSS -CPW simulations ?’ is closed to new replies.
Ansys Innovation Space
Trending discussions
- HFSS Incident Plane Wave excitement mode
- Ansys Maxwell 3D – eddy current
- dq graph non-conformity
- Simplorer+Maxwell Cosimulation results and Maxwell results mismatch
- Maxwell circuit – PWM
- Parametrizing coil “terminals” with coil geometry
- Difficulty/Obstacle: “Parasolid entry check failed for part:”
- Ansys-MATLAB Co-Simulation
- Plotting Ex, Ey and Ez in vector forms individually
- Calculating E-field tangential to a 2D resonant structure on a sapphire chip
Top Contributors
-
1962
-
886
-
599
-
591
-
366
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.