Automating Preload on Bolts Pointing a Single Point
-
-
How can IÂ automate the preload on the bolts which are pointing to one single point as shown in the picture?
-
The problem is solved with the help of a friend. Turns out when the selected entity for the preload geometry is a body, it is mandatory to define a coordinate system; while if a face is used, program controlled option pops and if selected, sets proper axes for the preload.Â
-
Viewing 1 reply thread
- The topic ‘Automating Preload on Bolts Pointing a Single Point’ is closed to new replies.
You are navigating away from the AIS Discovery experience