Reply To: Push Excitations not working in dynamic link

[philtran]

In circuit designer, I have created an impedance matching network for an antenna that I have designed to be matched to a 50 Ohm source. I then push the excitation back into my hfss model, but neither the return loss nor the realized gain of the system changes in the HFSS design. When going to the edit sources menu, the magnitude is shown to be pwl(mode_Ant3_mag,Freq) and the phase is pwl(mode_Ant3_phs,Freq), so I know that some sort of excitation from the circuit designer was pushed back to the HFSS model. I just do not know the values of the excitation pushed.