We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Installation and Licensing › Ansys Products › Tutorial or Help for 2 way FSI › Reply To: Tutorial or Help for 2 way FSI

November 26, 2024 at 2:26 pm
ashishkumar.gupta
Subscriber

Animation was just for representation so u understand the KINEMATICS of BB and my requirements. 

Obviously, I want to model an engg. solution using 2 way FSI in Ansys. 

 

This is what I have modeled in Ansys Mech. and Fluent. I have kept the contacts Frictionless as the Ball and Races will never touch each other. They will always be separated by a Lubricant Film between them.

I hope I was able to convey my problem to you and hope to receive some feedback to set-up this FSI in Ansys.

I have asked around and some suggested that Ansys might have limitations to not be able to perform the 2 way FSI when -- > 'Mechanical objects makes the Fluid move. So Mechanical is the Driving Factor.'