We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Discuss Simulation › Electronics › Maxwell 2D solver error › Reply To: Maxwell 2D solver error

November 8, 2024 at 3:43 pm
Ivonne Marti
Ansys Employee

Hi,

Please verify that your setup for the Hysteresis model is correct. There are not values in Hci and Br. You can find detailed information in the Help around the topic Core Loss: Hysteresis model

Also check that the BH curve you are introducing contains enough consecutive points.

Â