Reply To: Taking Static Structural Total Deformation Result to Fluent

[Aniket]

have you checked:

Export deformed geometry from one system to another. | Ansys Knowledge

this shows two methods, first one exports deformed mesh directly, but in your case, you should export STL as shown in the video at the end, and take it to other software such as Discovery or SpaceClaim to assemble it with other meshes

The following articles would be useful creating a solid again from the STL:

https://ansyskm.ansys.com/forums/topic/discovery-spaceclaim-3d-printing-prep-stl-facet-editing-stl-smoothing-reducing-and-regularizing-with-spaceclaim/

https://ansyskm.ansys.com/forums/topic/solid-model-creation-from-stl-in-spaceclaim-2/

https://ansyskm.ansys.com/forums/topic/discovery-spaceclaim-3d-printing-prep-stl-facet-editing-stl-smoothing-reducing-and-regularizing-with-spaceclaim/

-Aniket

Forum Rules & Guidelines