Ansys Learning Forum › Forums › Discuss Simulation › Electronics › Warning: “Outlines on High Priority Represent Faces Are Not Preserved Well” › Reply To: Warning: “Outlines on High Priority Represent Faces Are Not Preserved Well”
September 15, 2024 at 2:08 am
Subscriber
Hi Jason,
I was able to resolve the issue after re-examining the geometry. It turns out my 2nd waveport was completely covered by a PEC on one side (which is necessary), but also partially covered by a PEC on the other side. Once I changed this the warning went away.
Thank you,
Shyam