Ansys Learning Forum Forums Discuss Simulation General Mechanical Stabilizing FEA Analysis for Applied Pressure in ANSYS Reply To: Stabilizing FEA Analysis for Applied Pressure in ANSYS

Farah
Subscriber

 

Hello Ashish,

This is the error: “Solution not converged at time 0.57 (load step 1 substep 570).” 

Here is my setup:

E=0.1MPa, v=0.49, time-step= 0.001, Ens time=1.019 s,  Physics= Explicit, Element order= liner, element size= 0.00075, defeature size= 0.00030, solver= Quasi statis, type= Direct, P=-1500 Pa

Thank you in advance for your help!