Ansys Learning Forum › Forums › Discuss Simulation › Fluids › Water Absorption in Porous Media – Ansys Fluent › Reply To: Water Absorption in Porous Media – Ansys Fluent
July 25, 2024 at 3:25 pm
Simo
Subscriber
I set as upper condition wall (outflow is not allowed for Eurelian flows), and I set two-phases and i modeled air as same as the water. Is that correct? Upon I have found packed bed values C2 and alpha, I inserted that into both air and water phases' schedule. Should air have the same values than water?