July 22, 2024 at 11:03 am
Raoul Abas
Subscriber

The run is stopped at very beginning and not even creating d3hsp.

I got this message:

forrtl: severe (174): SIGSEGV, segmentation fault occurred
Image              PC                Routine            Line        Source             
ls-dyna_mpp_s_R13  000000000771A243  Unknown               Unknown  Unknown
libpthread-2.28.s  000014E480A7CCF0  Unknown               Unknown  Unknown
libc-2.28.so       000014E47F187646  strtok_r              Unknown  Unknown
libmpifort.so.12.  000014E4807F4561  __I_MPI___intel_s     Unknown  Unknown
libmpi.so.12.0     000014E47FD83BE5  Unknown               Unknown  Unknown
libmpi.so.12.0     000014E47FD868F4  Unknown               Unknown  Unknown
libmpi.so.12.0     000014E47FD2764B  Unknown               Unknown  Unknown
libmpi.so.12       000014E47FD14BDB  MPI_Init              Unknown  Unknown
libmpifort.so.12.  000014E48079A240  MPI_INIT              Unknown  Unknown
ls-dyna_mpp_s_R13  000000000041D90A  MAIN__                   3794  lsdyna.f
ls-dyna_mpp_s_R13  0000000000417362  Unknown               Unknown  Unknown
libc-2.28.so       000014E47F121D85  __libc_start_main     Unknown  Unknown
ls-dyna_mpp_s_R13  0000000000417269  Unknown               Unknown  Unknown

MPI: 

export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/ansys_inc/v232/commonfiles/MPI/Intel/2018.3.222/linx64/lib

/ansys_inc/v232/commonfiles/MPI/Intel/2018.3.222/linx64/bin/mpiexec

 

It seems that it can't get the correct library

 

 

 

Â