We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.

Ansys Learning Forum › Forums › Discuss Simulation › Fluids › An error occurred during the analysis of Fluent dynamic mesh › Reply To: An error occurred during the analysis of Fluent dynamic mesh

April 30, 2024 at 9:27 am
kim kyurae
Subscriber

This error occurred during the interpretation of 8 seconds, with approximately 5 seconds or 1300 iterations elapsed. The CPU used is an i9-13900KF, and 14 cores were allocated in the solver settings. The analysis was conducted by opening the saved case file, and using the Report Definitions feature to save around 14 files for each time step.