We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Discuss Simulation › Fluids › Using Dense Discrete Phase Model Injection Type › Reply To: Using Dense Discrete Phase Model Injection Type

April 3, 2024 at 2:15 pm
ENeo178
Subscriber

The flow rate for the continuous phase is 24 metre cubic per second. A rectangular 2D surface D=0.2m and L=30m with inlet V=4m/s.