We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.

Ansys Learning Forum › Forums › Discuss Simulation › General Mechanical › Error in meshing which says,”One or more entities failed to mesh.” › Reply To: Error in meshing which says,”One or more entities failed to mesh.”

March 14, 2024 at 5:34 pm
mnmirlek
Subscriber

Thank you Aurojyoti Prusty and Sampat Kumar for replying.

I tried to open the link but it is not opening in my computer.

Also I tried to follow the steps which are mentioned by Sampat Kumar. I think I have repaired the geometry because now there is no option to show problematic geometry in the error. However there is now new error which says,"The mesh did not complete due to poor quality elelments or incorrect inputs. Please try meshing with another mesh method or different mesh options."

The third step that you mentioned that I could not perform as I did not get that. Can you please eloborate it more like how to proceed for it? I will really aprreciate help. I have attached some pictures for your reference. 

Thank you