I ran the simulation on steady state. And I realized that the injection particle/injection are not reaching to the other end to the outlet. May be thats why i am getting zero value for escaped mass. So, What should I do, so that the particle can reach to the other end(outlet) with provided velocity and able to track the particle ( no. of trap, no. of escape, no. of injected)? nParticle size- 0.000128 m. nvelocity- 4 rpmnmaterial- ash solidnmass rate- 0.16375 kg/snnot sure about start time and stop time.nShould I run this model on Steady state or Transient state?.
nn
nn
You are navigating away from the AIS Discovery experience