Course Assessment — Structural Simulation Using Ansys Discovery
Quiz Summary
0 of 10 Questions completed
Questions:
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 10 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
-
Unfortunately, you did not pass the quiz.
Don't be discouraged - Go through the course material including the lecture videos, handout slides, and simulation examples to prepare and try again.
-
Congratulations, you have passed the quiz!
You still have room for improvement - Review the slides and simulation examples again to identify the concepts that you may have missed.
-
Congratulations, you have passed the quiz!
You scored better than average, but if you are still unsure about a particular topic, try starting a discussion on the Ansys Learning Forum to discuss your questions with peers around the world.
-
Congratulations you have passed the quiz!
You did great - Check out other courses to further your knowledge. Also, visit the Ansys Learning Forum and participate in discussions on this subject to help your peers and deepen your own knowledge.
-
Congratulations you have passed the quiz!
You have excelled on this topic - Check out other courses and see if you can ace them too. Also, visit the Ansys Learning Forum to help your peers on this topic. With your knowledge, you can make a real difference.
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 10
1. Question
What are the 3 modes available in Ansys Discovery? Select all that apply.
-
Question 2 of 10
2. Question
Which of the following modes in Ansys Discovery utilizes the Mechanical solver?
-
Question 3 of 10
3. Question
Which of the following structural physics are not available in Ansys Discovery? Select all that apply.
-
Question 4 of 10
4. Question
Which of the following contact options are available in Refine mode? Select all that apply.
-
Question 5 of 10
5. Question
Which type of model non-linearities in a structural simulation problem can be solved using Ansys Discovery? Select all that apply.
-
Question 6 of 10
6. Question
Local mesh refinement is possible in both simulation stages in Discovery.
-
Question 7 of 10
7. Question
Which of the following meshing technology is used in Refine mode for FEA calculations?
-
Question 8 of 10
8. Question
What action is taken to remove all previous design results in the design exploration?
-
Question 9 of 10
9. Question
If you want to refine the voxel size for specific bodies, what option can you use in the Fidelity group?
-
Question 10 of 10
10. Question
What is the purpose of the Detection distance option in the contact review tool?