Course Assessment - Mode Superposition Transient Analysis
Quiz Summary
0 of 10 Questions completed
Questions:
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 10 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
-
Unfortunately, you did not pass the quiz.
Don't be discouraged - Go through the course material including the lecture videos, handout slides, and simulation examples to prepare and try again.
-
Congratulations, you have passed the quiz!
You still have room for improvement - Review the slides and simulation examples again to identify the concepts that you may have missed.
-
Congratulations, you have passed the quiz!
You scored better than average, but if you are still unsure about a particular topic, try starting a discussion on the Ansys Learning Forum to discuss your questions with peers around the world.
-
Congratulations, you have passed the quiz!
You did great - Check out other courses to further your knowledge. Also, visit the Ansys Learning Forum and participate in discussions on this subject to help your peers and deepen your own knowledge.
-
Congratulations you have passed the quiz!
You have excelled on this topic - Check out other courses and see if you can ace them too. Also, visit the Ansys Learning Forum to help your peers on this topic. With your knowledge, you can make a real difference.
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 10
1. Question
What are the advantages of using the Mode Superposition Method for Transient Analysis? Select the best option.
CorrectIncorrect -
Question 2 of 10
2. Question
What is the governing equation of motion for a Linear Transient Analysis? (Standard Notations are used in the equations)
CorrectIncorrect -
Question 3 of 10
3. Question
Which of the following is TRUE regarding the Step Controls for Mode Superposition Transient Analysis?
CorrectIncorrect -
Question 4 of 10
4. Question
Impulse loading can be used as an input excitation in Transient analysis. Which of the following statement describes Impulse load correctly? Select the best option.
CorrectIncorrect -
Question 5 of 10
5. Question
Inputs are excitations consisting of loads that are a function of time. Which of the following statements are true regarding how loads are defined? Select the two best options.
CorrectIncorrect -
Question 6 of 10
6. Question
In a finite element analysis, sampling error occurs _________, and is indicated by _________. Select the two best options that complete the sentence.
CorrectIncorrect -
Question 7 of 10
7. Question
In an analysis, a Sinusoidal function that stops and goes to zero after a specified period is needed as an input excitation. To simulate the same, which of the following process can be used? Select the best option.
CorrectIncorrect -
Question 8 of 10
8. Question
Which of the following measures can be taken to improve the accuracy of the MSUP Transient solution?
CorrectIncorrect -
Question 9 of 10
9. Question
Which of the following is False regarding the time step size for the Transient solution?
CorrectIncorrect -
Question 10 of 10
10. Question
How can we include the effect of stress stiffening in the MSUP Transient Analysis?
CorrectIncorrect