Course Assessment — Geometry Prep for Structural Simulation
Quiz Summary
0 of 10 Questions completed
Questions:
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 10 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
-
Unfortunately, you did not pass the quiz.
Don't be discouraged - Go through the course material including the lecture videos, handout slides, and simulation examples to prepare and try again.
-
Congratulations, you have passed the quiz!
You still have room for improvement - Review the slides and simulation examples again to identify the concepts that you may have missed.
-
Congratulations, you have passed the quiz!
You scored better than average, but if you are still unsure about a particular topic, try starting a discussion on the Ansys Learning Forum to discuss your questions with peers around the world.
-
Congratulations you have passed the quiz!
You did great - Check out other courses to further your knowledge. Also, visit the Ansys Learning Forum and participate in discussions on this subject to help your peers and deepen your own knowledge.
-
Congratulations you have passed the quiz!
You have excelled on this topic - Check out other courses and see if you can ace them too. Also, visit the Ansys Learning Forum to help your peers on this topic. With your knowledge, you can make a real difference.
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 10
1. Question
Which hotkey helps you to enter the cross-section mode by selecting face, edge or an axis?
-
Question 2 of 10
2. Question
In Discovery, you can access the major tools either from Ribbon Tab or from the Hex Halo?
-
Question 3 of 10
3. Question
In Discovery, what can be one of the reason when there are bodies shown as transparent when imported as surface body and need to be converted to solid so that it meshes in our simulation?
-
Question 4 of 10
4. Question
Which of the following options can be used to convert surface bodies to solids?
-
Question 5 of 10
5. Question
Small features like fillets, chamfer, holes can be easily removed using
-
Question 6 of 10
6. Question
After carrying out Share Topology on components, faces which are not shared are represented in which color?
-
Question 7 of 10
7. Question
"______" is used to create a conformal mesh and to ensure that we have accurate meshing within the intersection of different bodies.
-
Question 8 of 10
8. Question
By default Mid-Surface are located at
-
Question 9 of 10
9. Question
If we select "Active" Component while Mid-Surfacing, where are mid-surfaces created in the structure tree?
-
Question 10 of 10
10. Question
Which of the following option can be used to create naming convection or tags that can be used in the simulation to repeatably select geometry entities which can be used to define boundary conditions easily?