0 of 10 Questions completed
Questions:
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You must first complete the following:
0 of 10 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Unfortunately, you did not pass the quiz.
Don't be discouraged - Go through the course material including the lecture videos, handout slides, and simulation examples to prepare and try again.
Congratulations, you have passed the quiz!
You still have room for improvement - Review the slides and simulation examples again to identify the concepts that you may have missed.
Congratulations, you have passed the quiz!
You scored better than average, but if you are still unsure about a particular topic, try starting a discussion on the Ansys Learning Forum to discuss your questions with peers around the world.
Congratulations, you have passed the quiz!
You did great - Check out other courses to further your knowledge. Also, visit the Ansys Learning Forum and participate in discussions on this subject to help your peers and deepen your own knowledge.
Congratulations you have passed the quiz!
You have excelled on this topic - Check out other courses and see if you can ace them too. Also, visit the Ansys Learning Forum to help your peers on this topic. With your knowledge, you can make a real difference.
True or False: Transverse Electric (TE), Transverse Magnetic (TM), and Transverse Electromagnetic (TEM) propagation modes in a transmission line can come in several different modes
True or False: The Transverse Electric (TE) operational mode has a cutoff frequency at DC
True or False: A transmission line has to consist of two or more individual conductors to support Transverse Electromagnetic (TEM) propagation
True or False: The lowest cutoff frequency in a transmission line is known as its dominant mode
What is the width of a microstrip transmission line given a characteristic impedance of $Z_0 = 80 \Omega$, a relative permittivity of $\epsilon_r = 6.5$, and a height of $d = 15mm$?
What is the cutoff frequency for a coaxial cable with an inner radius of $a = 3mm$, an outer radius of $d = 20mm$, and a relative permittivity of $\epsilon_r = 3.45$
What is the relative permittivity of a coaxial cable that has a cutoff frequency of $f_c = 5GHz$, an inner radius of $a = 5mm$, and an outer radius of $b = 10mm$?
What is the characteristic impedance for a parallel plate waveguide operating in its $TE_3$ mode which has a height of $d = 15mm$ and a relative permittivity of $\epsilon_r = 15$?
What is the cutoff frequency of a rectangular waveguide operating in its $TE_{13}$ mode with dimensions of $a = 10mm$ and $b = 20mm$ and with relative permittivity of $\epsilon_r = 4$?
How wide is a rectangular waveguide operating at $f = 20GHz$ in its $TE_{23}$ mode with a relative permittivity of $\epsilon_r = 10$ and height of $b = 10mm$?