Theory Quiz — Platform Analysis | Ansys Certifications

Platform Analysis — Theory Quiz

Once you have finished the exam, click on the 'Mark Complete' button to save your progress and move to the next section.

1 / 10

What are the additional advanced diffraction physics, SBR+ builds with?

Uniform theory of diffraction

All the options are correct

Physical theory of diffraction

Creeping wave

2 / 10

Which rays are generated when an incident ray hits a penetrable surface in SBR+ solution type?

Reflected and transmitted rays

Reflected and scattered rays

Transmitted and scattered rays

None of the options are correct

3 / 10

Which fields are considered when using the PO and GO approximations in SBR+?

Incident, reflected and transmitted

Incident and transmitted

Reflected and transmitted

Incident and reflected

4 / 10

When does SBR+ stop the ray tracing process?

When ray is absorbed by surface

When ray escapes the scene

When second bounce

When first bounce

5 / 10

Which HFSS boundary condition is not an option when setting up a HFSS SBR+ simulation?

Layered impedance

Impedance

Finite conductivity

Lumped RLC

6 / 10

What excitation is required to perform a HFSS SBR+ simulation?

Incident plane wave

Lumped port

Voltage

Wave port

7 / 10

What is one way you can thicken a sheet in Ansys Electronics Desktop?

Right mouse click on selected Face > Arrange > Surface > Thicken Sheet

Right mouse click on selected Face > Edit > Thicken Sheet

Right mouse click on selected face > Edit > Surface > Thicken Sheet

Right mouse click on selected Face > Edit > Boolean > Thicken Sheet

8 / 10

What is one way you can create an object from a face of a geometry inside of Ansys Electronics Desktop?

Right mouse click on selected Face > Arrange > Surface > Create Object From Face

Right mouse click on selected Face > Edit > Create Object From Face

Right mouse click on selected Face > Edit > Surface > Create Object From Face

Right mouse click on selected Face > Edit > Boolean > Create Object From Face

9 / 10

How do you create a relative coordinate system in Ansys Electronics Desktop?

Go to Modeler menu > Coordinate System > Create Relative Coordinate System

Go to Draw menu > Coordinate System > Create Relative Coordinate System

All the options are correct

Go to Model menu > Coordinate System > Create Relative Coordinate System

10 / 10

How to export the source fields for SBR+ solution type in Ansys Electronics Desktop?

Theory Quiz — Platform Analysis

Theory Quiz — Platform Analysis

Total time - 20 mins.

Total number of Questions - 10