Electrothermal Simulation — Simulation Quiz
Total number of questions - 4
Before starting the quiz simulate the rectangular edge fed patch antenna using Antenna Toolkit.
Solution frequency = 6 GHz and substrate material = FR4 epoxy.
Perform electrothermal analysis with the following settings. For each case, create a new design and rename it.
Case A: Same flow as the workshop video without a power block.
Case B: Same as case A with inlet Y velocity = 1 m/s.
Case C: Turn off radiation model, set inlet Y velocity = 0 m/s.
Case D: Simulate the rectangular edge fed patch antenna using Antenna Toolkit.
Solution frequency = 6 GHz and substrate material = Bakelite.
Perform electrothermal analysis with inlet Y velocity = 1 m/s.